Q: What are the hashrate and power consumption of the LV08 home miner?
A: At 25°C, the LV08 delivers a typical hashrate of 4200 GH/s (±10%) with a power consumption of 120W (±10%), offering good energy efficiency among home miners. It uses the SHA256 algorithm and supports AC input from 100–240V.
Q: What are the hardware specifications of this solo miner?
A: The LV08 features WiFi 2.4G and hotspot connectivity. Its dimensions without packaging are 200 × 128 × 70 mm, with a net weight of 1.1 kg. The noise level is 38 dBA at 25°C, making it suitable for home environments.
Q: What are the environmental requirements for the LV08?
A: The operating temperature range is 0°C to 30°C, with a storage range of -20°C to 70°C. Operating humidity should be maintained between 10% and 90% RH. The device should be placed in a dry and well-ventilated space.
Frequency & Core Voltage Limits
Q: What are the recommended frequency and core voltage for the LV08?
A: Frequency should be kept at or below 575 MHz, and core voltage should not exceed 1300 mV. When power consumption exceeds 130W, gradually reduce frequency and voltage to avoid overheating or instability.
Mineable Projects & Reference Pools
Q: Which cryptocurrencies can this home miner mine?
A: The LV08 supports all SHA256 algorithm projects, including but not limited to: BTC, BCH, BSV, DGB, XEC, RBL, BTCP, BIT, AUR, WCN, PPC, RVB, ACG, LCC, GLT, and X1C. For updated pool addresses, refer to the Bitcoin mining pool stats page.
Q: What are some reference pools for this solo miner?
A: Below are reference pools for select coins:
- BTC: pool.vkbit.com:3333, public-pool.io:21496, btc.viabtc.io:3333
- BCH: p2p-spb.xyz:9338, Solo-bch.2miners.com:9090, www.viabtc.com:3333
- BSV: bsv.gorillapool.io:3333, europe.mining-dutch.nl:4014
- DGB: pool4ever.com:5109, pool.dgb256.online:8080, p2p-spb.xyz:5027
- XEC: hashpool.live:10043, xec.luckymonster.pro:9113, mining.viabtc.io:3014
- RBL: mining4people.com:4181, afinepool.xyz:4931, pool4ever.com:5014
Q: Can the LV08 access all mining pools?
A: Due to regional network restrictions and varying pool access conditions, the LV08 cannot guarantee access to all pools. The manufacturer is not responsible for access issues caused by regional blocks, pool service outages, or network failures.
Troubleshooting Guide
Q: The miner is powered on but cannot connect to WiFi. What should I do?
A: Check the following:
- WiFi band: The LV08 only supports 2.4GHz. Do not use 5GHz networks.
- Special characters: WiFi name and password must contain only letters and numbers. No special characters allowed.
- Control IC: If the control chip hasn't started, press the reset button 1–3 times while the device is powered on.
Q: The miner is powered on, but the screen and fan do not respond. What could be the issue?
A: The power cord may have poor contact. Check the connection. If plugging and unplugging doesn't help, try replacing the power cord.
Q: The miner runs with low power consumption (below 20W). What should I do?
A: This usually indicates the control IC hasn't started. Press the reset button 1–3 times while the device is powered on to reset the main control chip.
Q: WiFi is connected, but the miner keeps restarting repeatedly. What could be the cause?
A: There are two main possibilities:
- Pool resolution failure: Try switching to a different mining pool.
- WiFi congestion: Switch to a stable WiFi network or use a hotspot connection.
Q: The miner restarts frequently and the hashrate is unstable. How should I troubleshoot?
A: Check the following in order:
- WiFi stability: Switch to a stable WiFi or hotspot.
- Pool restrictions: Switch to a locally accessible pool or a well-known pool.
- Temperature: Keep the environment below 30°C and place the device in a well-ventilated area.
Q: What should I check if the hashrate reads zero?
A: Verify the following two items:
- Wallet address: Ensure you are using the mainnet address of the coin you're mining (e.g., BTC addresses start with 1, 3, or bc1).
- Username configuration: Some pools require registered accounts. Enter the corresponding miner name during configuration.
